The balancing stream of the polymer melt from polycondensation section is discharged through metering pumps to the casting head. The molten ribbons coming out of the casting head are taken on the cooling chambers of chips cutter where the molten ribbons are cooled by chilled DM water system. The solidified polymer ribbons are then cut in chips cutter and dried in the dryer. The dried chips are then passed through the classifier. The properly cut chips are stored in chips silo. The chips are conveyed to the bagging silo for bagging.
Technology
- Produced in a continuous polyester polymerisation plant
- Uniform chemical and physical properties
PRODUCT RANGE |
Properties of Semi-Dull Chips |
I V (60 : 40; P : TCE) |
0.635 +/- 0.01 |
% TiO2 |
0.30 +/- 0.03 |
Carboxylic End Group (MEQ/Kg) |
Max 38 |
Colour |
l' value 72 +/- 3.0
b' value 1.5 +/- 1.0 |
Chips/Gm |
24-26 |
% DEG Content |
1.3 +/- 0.1 |
PACKING |
Packaging-800 kg HDP bags |
CONTAINER LOADING 900 KG/BAG |
40' Container |
40 Bags |
20' Container |
20 Bags |
Truck |
10 Bags |
|